24. CHANNEL BASS CONTROL - This knob is used to adjust the low frequency levels of a channel
allowing for a maximum bass gain of 12dB or maximum signal decrease of -30dB. Turning the knob
in a counter-clockwise direction will decrease the amount of bass applied to a channel signal, turning
the knob in a clockwise direction will increase the amount of bass applied to a channel signal.
25. FEATHER FADER PLUS CROSSFADER - This fader is used to blend the output signals of chan-
nels one and two together. When the fader is in the full left position (channel 1), the output signal of
channel one will be controlled by the master volume level. The same fundamentals will apply for chan
-
nel two. Sliding the fader from one position to another will vary the output signals of channels one
and two respectively. When the crossfader is set in the center position, the output signals of both the
channels one and channels two will be even.
26. Q-START ON/OFF SWITCH -
This function works in conjunction with a compatible American DJ®
or American Audio® “Q” Start CD player. When used with a compatible CD player, you can use the
crossfader to start and stop a CD Player with the slide of the mixer’s CROSSFADER (25). The ON/OFF
“Q" START SWITCH activates the FADER “Q" START feature. When in the ON position, the FADER
“Q" START automatically returns the CD player to the preset CUE POINT.
For example; Assuming you have two compatible American Audio™ CD players or a
compatible dual CD player connected to channels one and two. When the Fader "Q" Start option
is turned on, sliding the crossfader to the far left position will trigger playback on CD player
1. When the crossfader is pushed to the far right position, playback on CD player 2 will
begin, and CD player 1 will return to the cue position. Refer to your American Audio CD
player user manual for setting CUE POINTS. Turn the ON/OFF SWITCH to the OFF
position to disengaged “Q” Start function and resume to a normal fader.
27. CUE SELECTOR BUTTON - These buttons are used to activate a channels “CUE” mode. The
red CUE LED will glow when a channels cue mode is activated. The Cue function sends a channels
incoming signal to the headphones. The cue level is adjusted by the CUE LEVEL KNOB (19). Be sure
the CUE MIXING KNOB (20) is set to the “CUE” position to hear a selected channel source.
28. MIC 2 VOLUME CONTROL - This knob controls the output volume of MICROPHONE 2 (36).
However, master volume is controlled by the MASTER VOLUME CONTROL (7).
29. MIC 1 VOLUME CONTROL - This knob controls the output volume of MICROPHONE 1 (1).
However, master volume is controlled by the MASTER VOLUME CONTROL (7).
30. MICROPHONE BASS CONTROL - This knob is used to adjust the low frequency levels of the micro-
phone with a maximum signal gain of 12dB or maximum signal decrease of -30dB. Turning the knob in
a counter-clockwise direction will decrease the amount of bass applied to the microphone signal, turn-
ing the knob in a clockwise direction will increase the amount of bass applied to microphone signal.
31
. MICROPHONE TREBLE CONTROL - This knob is used to adjust the treble levels of the
Microphone with a maximum signal gain of 12dB or maximum signal decrease of -30dB. Turning the
knob in a counter-clockwise direction will decrease the amount of treble applied to the microphone signal,
turning the knob in a clockwise direction will increase the amount of treble applied to microphone signal.
32. MIC 1 ON/OFF BUTTON - This switches MIC 1 On and Off.
33. MIC 2 ON/OFF BUTTON - This switches MIC 2 On and Off.
©American Audio® - www.americanaudio.us - Q-FXPRO Instruction Manual Page 11
Q-FXPRO CONTROLS AND FUNCTIONS cont.
(26 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern