American Audio Q-FXPRO Betriebsanweisung PDF herunterladen (Seite 13)

©American Audio® - www.americanaudio.us - Q-FXPRO Instruction Manual Page 13

40. CHANNEL 1: LINE 1 INPUT JACKS - DO NOT CONNECT TURNTABLES TO THESE JACKS!

CD players, Tape Decks and other line level instruments may be connected to these jacks. The red

colored RCA jack represents the right channel input and the white represents the left channel input.

Input volume will be controlled by channel three fader. The channel SOURCE SELECTOR SWITCH

(2) must be in the "Line 1" position, to monitor any source connected to these jacks.

41. CHANNEL 2: PHONO 2/AUX 2 INPUT - The type of input must directly reﬂect the selected

mode of the

LINE LEVEL SELECTOR SWITCH (38). Turntables equipped with MM pickup cartridge

(All DJ turntable use MM pick-up cartridges) may be connected to these jacks as long as the LINE

LEVEL SELECTOR SWITCH (38) is in the “PHONO 2” position. CD players, Tape Decks and other

line level instruments may only be connected to these jacks as long as the LINE LEVEL SELEC-

TOR SWITCH (38) is in the “AUX 2” position. Never connect line level instruments (CD players, tape

decks, etc.) to these jacks when the LINE LEVEL SELECTOR SWITCH (38) is in the “PHONO 2” posi-

tion, THIS MAY SERIOUSLY DAMAGE YOUR MIXER! The red colored RCA jack represents the right

channel input and the white represents the left channel input. Input volume will be controlled by the

channel three fader. The channel SOURCE SELECTOR SWITCH (2) must be in the "Phono 2/Aux 2"

position, to monitor any source connected to these jacks.

42. CHANNEL 2: LINE 2 INPUT JACKS - DO NOT CONNECT TURNTABLES TO THESE JACKS!

CD players, Tape Decks and other line level instruments may be connected to these jacks. The red

colored RCA jack represents the right channel input and the white represents the left channel input.

Input volume will be controlled by channel three fader. The channel SOURCE SELECTOR SWITCH

(2) must be in the "Line 2" position, to monitor any source connected to these jacks.

43. CHANNEL 3: AUX 3 INPUT - The type of input must directly reﬂect the selected mode of the

LINE LEVEL SELECTOR SWITCH (38). CD players, Tape Decks and other line level instruments may

only be connected to these jacks as long as the LINE LEVEL SELECTOR SWITCH (38) is in the “AUX

3” position. Never connect line level instruments (CD players, tape decks, etc.) to these jacks when

the LINE LEVEL SELECTOR SWITCH (38) is in the “PHONO 3” position, THIS MAY SERIOUSLY

DAMAGE YOUR MIXER! The red colored RCA jack represents the right channel input and the white

represents the left channel input. Input volume will be controlled by the channel three fader. The

channel SOURCE SELECTOR SWITCH (2) must be in the "Phono 3/Aux 3" position, to monitor any

source connected to these jacks.

44. CHANNEL 3: LINE 3 INPUT JACKS - DO NOT CONNECT TURNTABLES TO THESE JACKS!

CD players, Tape Decks and other line level instruments may be connected to these jacks. The red

colored RCA jack represents the right channel input and the white represents the left channel input.

Input volume will be controlled by channel three fader. The channel SOURCE SELECTOR SWITCH

(2) must be in the "Line 3" position, to monitor any source connected to these jacks.

45. CHANNEL 4: LINE 4 INPUT JACKS - These Jacks are used for line level inputs. Connect CD

players or Tape Decks to line level inputs. Line level musical instruments with stereo outputs such as

Rhythm Machines or Samplers should also be connected to line level inputs. The red colored RCA

jack represents the right channel input and the white represents the left channel input. Input volume

will be controlled by the channel four

fader. Do not connect turntables to these jacks, turntables

should only be connected to “Phono” inputs.

46. REC OUTPUT JACKS - This is a low current unbalanced output source designed for various

tape and CD recorders. The Record Out (REC OUT) level is dictated by the

CHANNEL FADER LEVEL

(6), it is not inﬂuenced by the MASTER VOLUME CONTROL (7).

47. ZONE LEVEL OUTPUT - Use this separate output signal to drive a booth monitor or separate

Q-FXPRO CONTROLS AND FUNCTIONS cont.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

American Audio Q-FXPRO Betriebsanweisung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio-Equalizer American Audio Q-FXPRO