196-02-C - DA7322 Audio Codec with DSP
© 2014 Dialog Semiconductor GmbH
Jumper and connector information 5.2
Table 1: 196-02-C Jumpers link positions and connectors
3.5mm connector for MIC 1 input
3.5mm connector for MIC 2 input
3.5mm connector for MIC 3 input
3.5mm connector for MIC 4 input
Differential P/N MIC1 input
Differential P/N MIC2 input
Differential P/N MIC3 input
Differential P/N MIC4 input
MIC1 -VE input pulled to GND with 2.2kΩ for two wire ECM
configuration
MIC1 -VE input shorted to GND for single ended microphone
input configuration
MIC1 -VE input pulled to GND with 47kΩ for differential ECM
microphone input configuration
MIC2 -VE input pulled to GND with 2.2kΩ for two wire ECM
configuration
MIC2 -VE input shorted to GND for single ended microphone
input configuration
MIC2 -VE input pulled to GND with 47kΩ for differential ECM
microphone input configuration
MIC3 -VE input pulled to GND with 2.2kΩ for two wire ECM
configuration
MIC3 -VE input shorted to GND for single ended microphone
input configuration
MIC3 -VE input pulled to GND with 47kΩ for differential ECM
microphone input configuration
MIC4 -VE input pulled to GND with 2.2kΩ for two wire ECM
configuration
MIC4 -VE input shorted to GND for single ended microphone
input configuration
MIC4 -VE input pulled to GND with 47kΩ for differential ECM
microphone input configuration
Connects MIC1_N to J30 (Headset) internally via chipset
Connects MIC1_N to J1 (MIC1) connector
Connects MIC1_P to J30 (Headset) internally via chipset
Connects MIC1_P signal to J1 (MIC1) connector
Kommentare zu diesen Handbüchern