American Audio COMMANDER PLUS - REV 4-5 Bedienungsanleitung PDF herunterladen (Seite 11)

Quiet Switching

Hex includes a number of unique features to make switching as quiet as

possible. Even so, the relays can still produce a small click in your audio path,

especially when using very high gain. To eliminate this click, HEX will disable the

main output from loop 6 for a few milliseconds while the loops are switching.

Because loop 1 is completely independent of the other loops and might not be

used in your audio path, you can select which loops trigger Quiet Switching (QS).

The QS interval is extremely short so that you won’t hear any dropout. You can

select a slightly longer interval in case you still have some audible artifact.

The default is to trigger on all loops with the short interval.

1) Apply power while holding down button #4. The LEDs will flash until you

release the button.

2) Press buttons #1 through #3 to set QS function:

Trigger Interval LED #1 LED #2 LED #3

None None OFF OFF X

Loop 1 Short ON OFF OFF

Loops 2-6 Short OFF ON OFF

All loops Short ON ON OFF

Loop 1 Long ON OFF ON

Loops 2-6 Long OFF ON ON

All loops Long ON ON ON

3) Remove power when finished.

Factory Restore

You can restore the factory default settings and clear any saved presets.

1) Apply power while holding down both buttons #2 and #3. The LEDs will flash

until you release the buttons.

2) LED #1 will be on. Press button #1.

3) Press buttons #2, #3, #4, #5 and #6 as each LED comes on.

4) The LEDs blink three times and then stay off when finished. Remove power.

1 2 ... 6 7 8 9 10 11 12

Keine Kommentare

American Audio COMMANDER PLUS - REV 4-5 Bedienungsanleitung Seite 11