American Audio HTD 4.5 Bedienerhandbuch Seite 10

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 19
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 9
6. Counterweight (27):
Locate and remove the tonearm Counterweight (27) from the packaging. Slide Counterweight (27)
onto the rear of the Tonearm (2). Turn it lightly and it will screw onto the rear shaft of the tonearm.
Turntable Connections:
1. Connect the unit's stereo output leads to a receiver or mixer. The red phono terminal represents
the right output channel and the white terminal represents the left output channel.
2. The thin black wire with a spade connector is the ground lead. The ground lead must be con-
nect to the mixer (receiver) to avoid pops and clicks associated with magnetic pick-up system
such as turntables.
Output Leads Mixer (Receiver)
L (White) -----------------------------> L Channel
R (Red) -----------------------------> R Channel
GND (Spade)-----------------------------> Ground
3. Connect the power core to matching outlet for your area. Only connect the power cord after the
all other connections have been made.
NOTE: Be sure to connect the ground terminals firmly to the Mixer or receiver.
SET-UP
Phono ground lead
Stereo phono lead
Stereo phono lead
Phono ground lead
©American Audio® - www.americanaudio.us - HTD 4.5™ Instruction Manual Page 10
Seitenansicht 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Kommentare zu diesen Handbüchern

Keine Kommentare