American Audio HTD 4.5 Bedienerhandbuch PDF herunterladen (Seite 15)

CONTROLS AND FUNCTIONS

19. Stylus Headshell - The included headshell is used to connect your sty-

lus with the tone arm.

20. Headshell Locking Nut - After attaching the headshell to the tonearm, this

locking nut will securely hold the headshell to the

tonearm.

21. S-Shaped Tone Arm - The tonearm is the mechanism that holds the head-

shell and stylus allowing it to glide across a record.

22. Tonearm Clamp and Rest - Use this rest to safely hold the tonearm in position

during non use and transportation.

23. Tonearm Lift Adjust Screw - This screw is used to adjust the clearance between

the stylus and a record. The stylus clearance is set

at the factory to be between 8~13mm. Adjustments

to the tonearm clearance should only be made if

necessary.

23. Tonearm Lever - This lever is used to safely elevates the tone arm

above a record surface without endangering a

records surface.

24. Tonearm Assembly Height Control - This adjustment is used to control the overall height

of the tonearm assembly. The tonearm should always

be perfectly parallel to the platter.

25. Anti-Skate Control - The anti-skate applies inward force to the tonearm to

prevent outward skipping across the record due to

the centrifugal force cause by platter rotation. The

anti-skate value should be equally to that of the sty-

lus counterweight pressure (see counterweight 27).

26. Counterweight - The counterweight adjustment applies the proper

downward pressure on the stylus.

19 2623222120 2524

1 2 ... 10 11 12 13 14 15 16 17 18 19

Keine Kommentare

American Audio HTD 4.5 Bedienerhandbuch Seite 15