American Audio XDM-250T Bedienerhandbuch Seite 6

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 12
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 5
19. Power Switch - This is the main power ON/OFF button. A yellow LED above the power switch will
glow to indicating power is ON. Be fore you turn the power on be sure you have made all connections to
the mixer. Also be sure you amplier are tuned off. Remember mixer on rst and turned off last.
20. Power Supply Jack - This connection is used for your detachable AC power cord. Only connect a
recommended power supply of AC 9v~12v, 500mA. Use of a power supply other than the recommend
power supply may damage your unit and will void your manufactures warranty.
21. Master Output Connectors - These RCA jacks send a low current unbalanced output signal.
22. Channel 2 Line Input Jacks - Connect CD players or Tape Decks to LINE inputs. Line level musical
instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected to
LINE inputs. Do not connect turntables to these jacks, turntables should only be connected to “Phono”
inputs. The red colored RCA jack represents the right channel input and the white jack represents the
left channel input.
23. Channel 2 Phono Input Jacks - Connect turntables equipped with MM pickup cartridge to PHONO
inputs (All DJ turntable use MM pick-up cartridges). The red colored RCA jack represents the right
channel input and the white represents the left channel input.
24. Channel 2 Ground - Connect a turntable ground lead to this terminal. This will reduce the humming
and popping noises associated with magnetic phono cartridges.
25. Channel 2 Line Input Jacks - Connect CD players or Tape Decks to LINE inputs. Line level musical
instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected to
LINE inputs. Do not connect turntables to these jacks, turntables should only be connected to “Phono”
inputs. The red colored RCA jack represents the right channel input and the white jack represents the
left channel input.
26. Channel 2 Phono Input Jacks - Connect turntables equipped with MM pickup cartridge to PHONO
inputs (All DJ turntable use MM pick-up cartridges). The red colored RCA jack represents the right
channel input and the white represents the left channel input.
Rear Panel
19 2426252423222120
XDM-250T Controls and Features Cont.
©American Audio® - www.americandj.com - XDM-250T™ Instruction Manual Page 6
Seitenansicht 5
1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare