American Audio VELOCITY - REV 4-05 Betriebsanleitung PDF herunterladen (Seite 16)

METRO RAIL DESIGN CRITERIA SECTION 9 / SYSTEMS

DE304.09 9-11 Revision 4: 05/09/12

Metro Baseline Re-Baseline: 04/29/10

Emergency Swing Gates and Fencing used in fare barriers shall be 5 ft. in height

and be of stainless steel construction for underground stations and painted steel

construction for other than underground stations.

TVM locations shall allow for front TVM door swing opening at least 130

degrees, based on door being full width of machine and hinged on the left side

of cabinet. SAV locations shall allow for top cover swing opening at least 130

degrees, based on the angled cover being full width and depth and hinged at the

top back side of the cabinet. This shall be considered in locating fare collection

equipment near support columns, trash enclosures, and other vertical elements

in the station design.

TVM and SAV locations shall account for patron sight distances of trains and

vehicles at intersections.

The maximum dimensions of each TVM are 36” wide x 25” deep x 74” high

(76.2” to top of fan shroud). The maximum dimensions of each SAV are 14”

wide x 7” deep x 43” high. An additional side clearance of 12” minimum, back

clearance of 6” minimum, and front clearance of 48” minimum shall be provided

for the TVM. SAVs shall be sited with 14” side parallel to patron flow across the

paid/non-paid boundary, have a back-to-back clearance of at least 4” and have

a minimum front-to-front clearance of at least 48” for ADAAG compliance.

Side clearance is required for patron queuing space, ADAAG clear space,

equipment installation, and for opening the doors of the machines for

maintenance and service. If TVMs/SAVs are grouped such that two or more

machines are side-by-side in a grouping, the external side clearance needed to

either external side of the grouping shall be 6” for TVMs and 8” for SAVs. These

space requirements shall be taken into account when locating TVMs or SAVs

near support columns, trash enclosures, and/or other vertical elements in the

station design.

Canopy coverage shall be provided for TVMs, fare gates, and SAVs for

protection of equipment when it is opened for maintenance and revenue

servicing during inclement weather. This will also provide weather protection for

passengers using the equipment.

B. Basic Provision Requirements

1. Equipment Pad – TVMs, Fare Gates and SAVs

TVMs, Fare Gates, and SAVs will be designed for outdoor installation and

be freestanding, suitable for mounting to finish surface using anchors at the

four corners within the base of each equipment cabinet type.

The minimum concrete slab thickness in area for mounting TVMs, fare

gates, and SAVs shall be at least 8” throughout footprint of the device,

extending at least 12” beyond the footprint perimeter to allow for drilling and

setting anchors. Station platform slopes at equipment location shall be

limited to a maximum of 2% transverse and 2.4% longitudinal. The pad

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 190 191

Kommentare zu diesen Handbüchern

Keine Kommentare

American Audio VELOCITY - REV 4-05 Betriebsanleitung Seite 16

Kommentare zu diesen Handbüchern