American Audio VELOCITY - REV 4-05 Betriebsanleitung PDF herunterladen (Seite 177)

METRO RAIL DESIGN CRITERIA SECTION 9 / SYSTEMS

Appendix A

DE304.09 Appendix 9A-16

Metro Baseline Re-Baseline: 04/20/10

E Analog IFM shall allow separate configuration of each input for single-ended or

differential voltage or current and provide shield grounding terminals. The

Contractor may propose an alternative solution consisting of DIN mounted

terminal devices with a connection to the analog input modules using a PLC

vendor pre-manufactured cable.

F The Contractor may propose an alternative higher density solution consisting of

DIN rail mounted terminal blocks and plug in relays (for outputs) with a

connection to the output modules using a PLC vendor pre-manufactured cable.

4.7 ACCESSORIES

A Auxiliary DC Power Supply

1. Phoenix Contact QUINT-PS-100-240AC/24DC/ 5 or approved equal.

2. 24VDC @ 5 amp, DIN mount.

B 4-Port Gateway communications server

1. Fieldserver FS-B3510 or approved equal.

2. 4 serial ports (2 RS323, 2 RS485)

3. 2 Ethernet ports

4. Supports a library of protocols including Allen Bradley DF1, MODBUS

ASCII, MODBUS RTU, Hanning & Kahl HCS-V, Notifier FACP protocols,

Safetran SCS128, Ansaldo/US&S Genisys, Allen Bradley Ethernet/IP, GE

SRTP, MODBUS TCP, Telnet.

5. 24VDC with less than 2 AMP power consumption.

C 10-Port Gateway communications server

1. Fieldserver FS-B4010-01 or approved equal.

2. 10 serial ports (8 RS323, 2 RS485)

3. 2 Ethernet ports

4. ISA card slot for specialty communications modules supporting DH+,

Profibus, DeviceNet, LonWorks, and ControlNet.

5. Supports same library of serial/Ethernet protocols as listed for the 4-port

communications gateway.

6. 120VAC operation with less than 1.5A consumption.

D PROFIBUS DP-V0 Communications Module

1. In-chassis module compatible Profibus DP-V0 slave communications

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 190 191

Keine Kommentare

American Audio VELOCITY - REV 4-05 Betriebsanleitung Seite 177