American Audio Q-MX1 Spezifikationen PDF herunterladen (Seite 53)

Overview of BIOS Features

2.3 Jumper Block

CAUTION

Do not move the jumper with the power on. Always turn off the power and unplug the

power cord from the computer before changing a jumper setting. Otherwise, the

board could be damaged.

Figure 15 shows the location of the jumper block. The jumper determines the BIOS

Setup program’s mode. Table 26 lists the jumper settings for the three modes:

normal

, configure, and recovery. When the jumper is set to configure mode and the

computer is powered-up, the BIOS compares the processor version and the microcode

version in the BIOS and reports if the two match.

Figure 15. Location of the Jumper Block

Table 26. BIOS Setup Configuration Jumper Settings

Function/Mode Jumper Setting Configuration

Normal 1-2

321

The BIOS uses current configuration information and

passwords for booting.

Configure 2-3

321

After the POST runs, Setup runs automatically. The

maintenance menu is displayed.

Recovery None

321

The BIOS attempts to recover the BIOS configuration. See

Section 3.7 for more information on BIOS recovery.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 83 84

Keine Kommentare

American Audio Q-MX1 Spezifikationen Seite 53