American Audio Q-MX1 Spezifikationen PDF herunterladen (Seite 55)

Overview of BIOS Features

2.5 Electrical Considerations

2.5.1 Power Supply Considerations

CAUTION

The +5 V standby line from the power supply must be capable of providing adequate

+5 V standby current. Failure to do so can damage the power supply. The total

amount of standby current required depends on the wake devices supported and

manufacturing options.

Additional power required will depend on configurations chosen by the integrator.

The power supply must comply with the indicated parameters of the ATX form factor

specification.

• The potential relation between 3.3 VDC and +5 VDC power rails

• The current capability of the +5 VSB line

• All timing parameters

• All voltage tolerances

For example, for a system consisting of a supported 65 W processor (see Section 1.4

on page 15 for a list of supported processors), 1 GB DDR2 RAM, one hard disk drive,

one optical drive, and all board peripherals enabled, the minimum recommended

power supply is 300 W. Table 27 lists the recommended power supply current values.

Table 27.

Recommended Power Supply Current Values

Output Voltage

3.3 V 5 V 12 V1 12 V2 -12 V 5 VSB

Current

15 A 15 A 10 A 10 A 0.3 A 3.0 A

For information about Refer to

Selecting an appropriate power supply http://support.intel.com/support/motherboards/desk

top/sb/CS-026472.htm

2.5.2 Fan Header Current Capability

CAUTION

The processor fan must be connected to the processor fan header, not to a chassis fan

header. Connecting the processor fan to a chassis fan header may result in onboard

component damage that will halt fan operation.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 83 84

Keine Kommentare

American Audio Q-MX1 Spezifikationen Seite 55