Functions (Front Panel) Cont.
(11) CUE MIXING CONTROL - Mixes the signal to be monitored. The monitor signal comes from the Prefader. This
means it will not be affected by the channel faders. You can monitor each channel individually. Connect your head-
phones to the HEADPHONES jack (14). Slide the CUE MIXING CONTROL (11) to CUE and select the desired channels
with the CUE switches (7). When you slide the CUE MIXING CONTROL to PGM (PFL switches without function), you
can cue the output signal of the mixer. If the CUE MIXING CONTROL is set to the center position, you can cue both the
channel signal you selected and the output signal. With the CUE LEVEL control (12), you can adjust the phones volume
without changing the output signal.
(12) CUE LEVEL CONTROL - Adjusts the headphone output level.
(13) MASTER FADER - Adjusts the level of the master output.
(14) HEADPHONES JACKS - Use this jack to connect the headphones. Headphones from 8 Ohms to 600 Ohms can be
used. 16 Ohms is recommended. The headphone input is conveniently located on the face panel.
(15) MIC 1 JACK - You can connect microphones with 1/4 inch (6.3mm) jack plug or XLR-plug.
(16) BNC-JACK FOR GOOSENECK LAMP - 12V DC
(17) ASSIGN SWITCH - Used to select which channel is to be mixed with another.
(18) MIC 1 & 2 VOLUME CONTROL - Adjust the microphone volume of MIC 1 and MIC 2.
(19) MIC BASS, MID, AND TREBLE CONTROL - Use these controls to fine-tune the MIC 1 signal. Increase the LOW’s
by turning the MIC BASS CONTROL to the the right, increase the MID’s by turning the MIC MID CONTROL to the right,
and increase the HIGH’s by turning the MIC TREBLE CONTROL to the right.
(20) SPLIT CUE - Control and monitor headphone signal. Slide fader to the left to hear the source music from channel
or channels selected by CUE BUTTONS (7). Slide fader to the right to hear PROGRAM MIX (PGM) output. The
smooth CUE MIXING fader is designed for fast and frequent headphone monitoring.
(21) MASTER BALANCE CONTROL - Used to adjust how much of the signal is sent to the left and right MASTER OUT
jack (31).
(22) PAN CONTROL - The balance control for each channel, or how much left and right signal for the specific channel.
There is a PAN CONTROL for each of the 3 channels.
(23) ZONE VOLUME, (24) ZONE BASS/TREBLE - Use ZONE VOLUME (23) and ZONE BASS & TREBLE (24) knobs
to control the output signal for the ZONE. (ie. other rooms in a club, another amplifier, a satelite speaker system, a
microphone paging system or the DJ control booth monitors).
Inputs and Outputs
(Rear Panel)
LINE 1
CH-1
PHONO 1
AUX 1
LINE 2
CH-2
PHONO 2
AUX 2
MASTER
OUTPUT
REC
L
R
MIC 1
34
39
35
32
36
26
AUX 2 PHONO 2
AUX 1 PHONO 1
GND
115
AC VOLTAGE
SELECTOR
AC INPUT 115/230V
FUSE 0.5A, F, 250V
27
30
33
GND
LIGHT
CONTROL
PLAYER CONTROL
21
37
29
25
31
CH-3
MIC 2
LINE 3LINE 4BOOTH
RIGHT BALANCED OUTPUT LEFT
28
38
25
American DJ
® AUDIO • Q-2422 User Instructions page 6
(12 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern