American Audio XSP-A Bedienungsanleitung PDF herunterladen (Seite 5)

HD-XSPA 4K Ultra High-Deﬁnition 7.1 Surround Sound AV Receiver

crestron.com

800.237.2041

DM 1: (1) 8-pin RJ45 female, shielded;

DM 8G+ input, HDBaseT compliant;

Connects to the DM 8G+ output of a DM switcher, transmitter, or other

DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or

Crestron DM-CBL-ULTRA cable

[3]

HDMI IN 2 – 5: (4) 19-pin Type A HDMI female;

HDMI digital audio/video inputs

HDMI OUT: (1) 19-pin Type A HDMI female;

HDMI digital audio/video output

AUDIO IN, DIGITAL 6: (1) JIS F05 female (TOSLINK) optical fiber connector;

S/PDIF optical digital audio input

AUDIO IN, DIGITAL 7 – 8: (2) RCA female;

S/PDIF coaxial digital audio inputs;

Input Impedance: 75 Ohms nominal

AUDIO IN, ANALOG L/R 9 – 10: (4) RCA female comprising (2) unbalanced

line-level stereo audio inputs;

Input Impedance: 10k Ohms;

Maximum Input Level: 2 Vrms

AUDIO IN, ANALOG BALANCED L/R 11: (1) 5-pin 3.5mm detachable

terminal block;

Balanced/unbalanced line-level stereo audio input;

Input Impedance: 24k Ohms balanced, 12k Ohms unbalanced;

Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced

PREAMP OUT, DOWNMIX L/R: (2) RCA female comprising (1) unbalanced

line-level stereo audio output;

Output Impedance: 100 Ohms;

Maximum Output Level: 2 Vrms

PREAMP OUT, SUB: (1) RCA female;

Unbalanced line-level subwoofer audio output;

Output Impedance: 100 Ohms;

Maximum Output Level: 6.3 Vrms

SPEAKER OUTPUTS, FRONT LEFT/RIGHT, SURROUND LEFT/RIGHT, BACK/

DOWNMIX LEFT/RIGHT, CENTER, SUB: (8) 2-pin 7.62mm 15A detachable

terminal blocks;

7.1, or 5.1 + stereo downmix, amplifier outputs;

Wire Size: Terminals accept up to 14 AWG

LAN: (1) 8-wire RJ45 female; 10Base-T/100Base-TX Ethernet port

COM: (1) 5-pin 3.5mm detachable terminal block;

Bidirectional RS-232 port;

Up to 115.2k baud, hardware and software handshaking support

IR 1 – 4: (1) 8-pin 3.5mm detachable terminal block comprising (4) IR/

Serial ports;

IR output up to 1.2 MHz;

1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud

RELAY 1 – 2: (1) 4-pin 3.5mm detachable terminal block comprising (2)

normally open, isolated relays;

Rated 1 Amp, 30 Volts AC/DC;

MOV arc suppression across contacts

SENS: (1) 5-pin 3.5mm detachable terminal block comprising (4) digital/

contact closure sensing inputs;

Input Voltage Range: 0 to 24 Volts DC, referenced to ground;

Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band;

Input Impedance: 10k Ohms at >5 Volts, 1M Ohms at <5 Volts;

Pull-up Resistor: 2.2k Ohms per input

FUSE (US/North America): Main fuse, T10AH;

(1/4” x 1-1/4”, 250V, 10A, time-lag, high-rupture rated)

FUSE (International): Main fuse, T5AH;

(1/4” x 1-1/4”, 250V, 5A, time-lag, high-rupture rated)

G: 6-32 screw, chassis ground lug

120V~50/60Hz MAX 6A (US/North America): (1) IEC 60320 C14 main

power inlet; mates with removable power cord (included)

220-240V~50/60Hz MAX 3A (International): (1) IEC 60320 C14 main

power inlet; mates with removable power cord (included)

COMPUTER (front): (1) USB Type B female;

USB computer console port (cable included);

For setup only

Display

Display Type: 16-bit TFT active matrix color LCD

Size: 2 inch (50 mm) diagonal

Resolution: 220 x 176 pixels

Functions: Displays audio settings and setup parameters

Controls & Indicators

PWR: (1) green LED, indicates operating power supplied via AC line

VOL p,q: (2) pushbuttons for volume adjustment

MUTE: (1) pushbuttons for audio mute

Navigation Pad: (1) 5-way navigation pad for menu navigation and

parameter adjustment

HOME: (1) pushbutton, returns to the home menu

BACK: (1) pushbutton, steps menu back one level

On/Off: (1) Rocker switch, turns unit on and off

DM 1 (rear): (2) LEDs, green LED indicates DM link status, amber LED

indicates video and HDCP signal presence

LAN (rear): (1) green and (1) amber LEDs, green indicates Ethernet link

status, amber indicates Ethernet activity

Power Requirements

Main Power (US/North America): 6 Amps @ 120 Volts AC, 50/60 Hz

Main Power (International): 3 Amps @ 220-240 Volts AC, 50/60 Hz

Environmental

Temperature: 41° to 104°F (5° to 40°C)

Humidity: 10% to 90% RH (non-condensing)

Heat Dissipation: 300 BTU/Hr (140W@8Ω);

425 BTU/Hr (240W@4Ω)

1 2 3 4 5 6 7

Kommentare zu diesen Handbüchern

Keine Kommentare

American Audio XSP-A Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Soundbar-Lautsprecher American Audio XSP-A