American Audio TTD-2400 USB Spezifikationen PDF herunterladen (Seite 12)

CONTROLS AND FUNCTIONS

©American Audio® - www.americanaudio.us - TTD-2400™ Instruction Manual Page 12

After attaching the headshell to the tonearm, this

locking nut will securely hold the headshell to the

tonearm.

8. HEADSHELL LOCKING NUT -

The tonearm is the mechanism that holds the HEAD-

SHELL (7) and stylus allowing it to glide across a

record.

9. S-SHAPED TONE ARM -

Engaging this button will rotate the platter at 33 revo

lutions per a minute (RPMs). A function LED will glow

when this function is activated.

10. 33-RPM SPEED SELECTOR BUTTON -

Engaging this button will rotate the platter at 45 RPMs.

A function LED will glow when this function is acti

vated.

11. 45-RPM SPEED SELECTOR BUTTONS -

This lever is used to safely elevates the tone arm

above a record surface without endangering a records

surface.

13. TONEARM LEVER -

Use this rest to safely hold the tonearm in position

during non use and transportation.

14. TONEARM CLAMP AND REST -

The anti-skate applies inward force to the tonearm

to prevent outward skipping across the record due

to the centrifugal force cause by platter rotation. The

antiskate value should be equally to that of the stylus

counterweight pressure (see counterweight 16).

15. ANTI-SKATE CONTROL -

The counterweight adjustment applies the proper

downward pressure on the stylus.

16. COUNTERWEIGHT -

The included HEADSHELL (7) is used to connect your

stylus with the tone arm.

7. STYLUS HEADSHELL -

This slider is used to adjust the playback pitch per

centage (platter speed). Use this slider to match the

BPM’s of this unit to that of another music source.

12. PITCH ADJUST SLIDER -

This over sized push button controls platter motion.

When the unit is turned on the platter will not auto

matically begin to spin. Pressing the button once will

engage the high torque motor and spin the platter,

pressing this again will stop the platter.

6. START/STOP BUTTON -

17. EXTRA STYLUS HOLDER -

This cut out has been designed to safely store an

extra stylus headshell.

18. RCA OUTPUT JACKS -

These jacks are used to send a low voltage "phono"

level output signal to a mixers "phono" input jacks.

Turntables should only be connected to “Phono”

inputs on a mixer. The red colored RCA jack repre

sents the right channel input and the white repre-

sents the left channel input.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

American Audio TTD-2400 USB Spezifikationen Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drehscheibe American Audio TTD-2400 USB