American Audio PSX - REV 1-2 Bedienerhandbuch Seite 9

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 10
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 8
DCC Specialties, 57 River Rd, Suite 1023, Essex Jct., VT. 05452 800-671-0641, info@dccspecialties.com www.dccspecialties.com 9 of 10
Before w iring please check that the program ju mper is on pins 2-3 of J 3. ( Pin 1 is nearest the center of
the card.) See below.
A
lso when wiring more than one PSX for multiple power distr icts insure that all input/output polarities are the
same. The illustration above shows the polarity and matching connector pin #’s. F or Common Rail wiring
the J2-1 output (Lower) is common and not needed. Both J1 inputs are still required.
Be sur e to c onnect the two wires f rom the booster to the INPUT and the two wir es to the track section to the
OUTPUT connections. If you c onnect the DCC Buss Power to the PSX’s outputs you will damage the PSX!
W hen po wer is appli ed the red LED, D12 near t he input and D7 ne ar the outp ut shou ld be on. If the stat us LED
D6 near the progr am j umper is on solid, you m ay h ave a s hort bet ween the t wo wires from the outpu t or in the
track s ection.
If you short the output si mulating a track short, the status LED D6 should come on and D7 near the output
should be of f. See page XXX f or m or e c om pl ete t est in g.
J2-2
PSX-1
J2-1
DCC
Booster
J1-3
Rail 2
Rail 1
J1-4
Quick Start
(A) All connections involve 2 Inputs from the DCC Booster or the main
line buss and 2 Outputs to the isolated track block!
(B) PSX 1,2,3,4 a re ready to operate without programmable options!
(C) Not compatible with Analog Address (00).
(D) Test first before connecting to layout, see User Guidelines, Pg-8.
Note: The small black screw terminals shown in picture are optional accessories available from
your dealer. The large green input/output terminals come with units. Generally the small
terminals are not needed as most of these are one-time connections and are easily soldered to the
bd. Use a small iron (20W-40W) for soldering to the bd.
D7
Seitenansicht 8
1 2 3 4 5 6 7 8 9 10

Kommentare zu diesen Handbüchern

Keine Kommentare