American Audio PSX - REV 1-2 Bedienungsanleitung PDF herunterladen (Seite 17)

OUTPUT RES LEDs

Indicate the resolution of the digital outputs. The PSX-100 always converts at 24-bit resolution. When record-

ing to 20-bit or 16-bit device, UV-22 may be applied to the outputs to maintain as much as possible of the orig-

inal 24-bit resolution without truncation. If a truncated 20- or 16-bit output is desired (for instance, when record-

ing into a sampler audio that is going to be drastically pitch changed) set OUTPUT RES to 24-bit: the recorder

will truncate the appropriate number of LSBs (least significant bits).

OPTICAL OUT LEDs

Indicate the format that will be present at the optical output – S/PDIF or ADAT.

SOFT LIMIT LED

Indicates that Soft Limit is enabled for the analog inputs.

MUTE L, MUTE R LEDs

Indicate that the main outputs are muted (left or right respectively).

ABS LED

Indicates that Apogee Bit Splitting is activated for the ADAT and TDIF outputs.

LEVEL

Meter segments light when signal exceeds the indicated level.

OVER LEDs

OVER indicates a digital level of ±full scale had occurred on the respective channel for the number of consec-

utive samples (1–4) determined by DIP switches 6 and 7. Overs are held indefinitely (until manually cleared)

unless DIP 2 is set (which provides 2-second hold).

METER LED

Indicates which signal (A/D output or D/A input) is being metered when in confidence monitor mode. When in

either

analog monitor mode or digital copy mode, both LEDs are lit since in each case there is only one sig-

nal to meter (either A/D or digital input respectively).

DIG COPY LED

Indicates that the PSX-100 is in digital copy mode (see Operational Notes).

D/A INPUT LEDs

Indicate selected digital input.

NOTES:

• In analog monitor mode (or confidence monitor mode when synced to a digital input), the digital audio input

can be used for sync purposes even if the audio portion of the signal is not used.

• In analog monitor mode, A/D OUT is usually lit. When using a digital input as sync source, (A/D Sync = DIG

IN) the appropriate dig input LED will illuminate.

• A/D OUT lit indicates that the PSX-100 is in Analog Monitor Mode.

• In 88.2/96K operation, both AES 1 and AES 2 LEDs will be lit indicating that both AES inputs are necessary

for L/R 88.2K or 96K D/A operation.

D/A SYNC

Indicates ‘AUX clock’ synchronization. The AUX clock runs the AUX digital output and the D/A Converter.

NOTES:

• When the A/D SYNC LED is lit, the AUX clock is slaved to the Main Clock (and is therefore synchronized to

the A/D SYNC source).

• The LOCK LED indicates that proper clock/data synchronization has been established.

PSX-100 User’s Manual

Page 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Kommentare zu diesen Handbüchern

Keine Kommentare

American Audio PSX - REV 1-2 Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Relacionado con productos y manuales para Cargadores De Bateria GP Batteries 13001GS3AC4