American Audio PSX - REV 1-2 Bedienungsanleitung Seite 34

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 34
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 33
MDM Input Selection: When using the
PSX-100 with modular digital multitracks,
select the pair of tracks you want to listen to
(or the set of tracks for replaying a bit-split
source).
AC Power Input: The AC input volt-
age is set internally. Check the voltage
setting is correct before operation, and
keep the rear panel label up-to-date.
TDIF Interface: A DB-25 connector
provides interfacing with TDIF devices such as
Tascam modular digital multitracks, consoles,
DAWs and digital audio PC cards which
feature this kind of interfacing.
D/A Input: The D/A can be set to monitor
either AES input (both are used in “fast”
mode), or any of the other interfaces, plus the
output of the A/D. Press the button repeatedly
to cycle through
active
inputs.
Apogee Bit-Splitting (ABS): Write 24-bit
channels to pairs of 16-bit 44.1/48 kHz tracks
(PaqRat mode) or use all eight tracks of a 16-
bit 44.1/48 recorder to capture stereo 24-bit
signals at 88.2/96kHz sampling.
DIP Switches for Option Selection: A
10-way DIP switch allows “set-once” parame-
ters to be determined, such as analog input/
output level; pin 2/3 hot; 2-second or infinite
“over” indication; “over” definition (1-4 con-
secutive FS); ABS enable on AES input (for
PCM-800 etc); and special sync parameters.
Digital Copy: In this mode, the selected
digital input is delivered to all the PSX-100’s
outputs, digital and analog. Ideal for format
conversion, adding UV22 to existing program
material, and for maximum D/A flexibility.
Level Trim: Screwdriver adjustment of
A/D and D/A analog levels for
calibration and gain-structure alignment.
USe in conjunction with CAL mode.
S/PDIF Coaxial Output: An industry-
standard RCA connector provides S/PDIF
coaxial output capability. At high sample rates
(88.2/96kHz), this socket provides a 44.1/48kHz
S/PDIF output derived from alternate samples.
Word Clock In & Out: BNC connectors
allow word clock interfacing. In addition, the
WC input socket can act as a video input when
the video option card is installed.
Meter: Press the button to toggle between
metering the A/D or the D/A.
D/A Sync: Indicates the sync source for the
D/A refers to the selected input.
s, showing controls, indicators and connectors.
Top Cover Label: The label shown below appears on the rear of the top cover of the PSX-100, and is read from the front of the unit. It
indicates the connectors that appear directly beneath the labels, as well as CE information and a block diagram of the A/D and D/A sections.
Seitenansicht 33
1 2 ... 29 30 31 32 33 34

Kommentare zu diesen Handbüchern

Keine Kommentare