American Audio TTD-2400 USB Bedienungsanleitung PDF herunterladen (Seite 7)

Ame

ican

Audio

TTD-2400 USB Instruction Manual Page 7

QUICK

START

Turntable

Quick-Start:

1. Changing Platter Speed

Use the RPM selectors (10 & 11) to change the platter speeds. The 33-rpm (10)

and 45-rpm (11) speed selectors change the platter rotation respectively.

2. Starting and Stopping the Platter

Use the START/STOP BUTTON (6) to switch back and forth between platter

rotation and pause modes.

3. Pitch Control

1. The pitch adjustment is a fine adjustment to the platter's RPMs.

2. The pitch adjustment is variable and may be adjusted between -10% and

+10% of the platter selected speed.

3. The pitch is changed by sliding the Pitch Slider (12) in an up and down

motion.

4. The STROBE INDICATORS (2) on the rim of the PLATTER (19) can be used

to visual approximate the platter pitch. These indicators are lit by the

STROBE INDICATOR PILOT LAMP (4) as they pass by the POWER

SWITCH (5). At different pitch levels each row of STROBE INDICATORS

(2) may appear stand still.

Note: The use of heavy fluorescent lighting directly above the turntable will

defeat the STROBE LAMP PILOT LAMP (4) affect indicator accuracy.

Product

Service:

1. Clean the stylus periodically with a soft brush to prevent the accumulation of

dust.

2. When sound becomes distorted or noisy, check the stylus. If the stylus is

worn out, replace it with a new one.

3. From time to time, the dust cover and turntable cabinet should be wiped

down with a soft, dry cloth.

4. Volatile materials should not be used, such as: alcohol, thinner, benzine etc.

They may remove the paint or damage the luster.

1 2 3 4 5 6 7 8 9 10 11 12 ... 33 34

Keine Kommentare

American Audio TTD-2400 USB Bedienungsanleitung Seite 7