American Audio PSX - REV 1-2 Bedienungsanleitung Seite 3

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 6
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 2
3of6 American Hobby Distributors, 57 River Rd, Suite 1023, Essex Jct., VT. 05452 800-671-0641, [email protected] www.amhobby.com
J6 Trip Current Settings by Jumpers
J6-1-4 See Table Below
J7 Weak System Boost
J7-1 to J7-2 Open: Auto Reset
J7-1 to J7-2 Jumpered: Manual Reset (open to reset)
J7-3 to J7-4 Open Block Occupied trips at 30mA
Jumpered Block Occupied trips at 300 mA
J10 Power In: Indicator (Remote)
J10-1 + AC Power In, LED Remote
J10-2 - AC Power In, LED Remote
J11 Track Power On: Indicator (Remote)
J11-1 + Track On LED Remote
J11-2 -Track On LED Remote
D11 Voltage Limiter
See Pg-3.
PowerShieldX-1,2,3,4AC,Wiring:
Wire to the Power Shield should be heavy enough to car ry the current. Size of wire depends on your scale. Too
much resis tance in t he wire or rails c an result in faulty short sensing. At a minimum, use, 12 Awg for O and G.
Connector Description
J1 Input Pow er Connector
J1-1 Connections for Daisy
J1-2 Chaining to next PSX
J1-3 AC Input 2
J1-4 AC Input 1
J2 Output Power Connector
J2-1 AC Output 2
J2-2 AC Output 1
J4 Block Occupancy
J4-3 + Block Occupied Output
J4-4 - Block Occupied Output
J4-5 + Block Shorted Output (A)
J4-6 - Block Shorted Output (A)
J5 Status Outputs (Remote)
J5-1 + Status LED Remote
J5-2 - Status LED Remote
J5-3 + Remote, power on output (A)
J5-4 - Remote, power on output (A)
(A) =Transistor Type Open Collector Output
Connector J6 Terminal #1 Terminal #2 Terminal #3 Terminal# 4
4.8 Amps None None None None
8.0 Amps Connect Connect
12.2 Amps Connect Connect
15.4 Amps Connect Connect Connect Connect
Note: The small black screw terminals shown in picture are optional accessories available from your dealer. The large green
input/output terminals come with units. Generally the small terminals are not needed as most of these are one time connections and
are easily soldered to the bd. Use a small iron (20W-40W) for soldering jumpers to the bd.
D11
Seitenansicht 2
1 2 3 4 5 6

Kommentare zu diesen Handbüchern

Keine Kommentare