X-Calibur 1
POWER
FUSE
OUTPUT
INPUT
X-Calibur 2
POWER
FUSE
OUTPUT
INPUT
X-Calibur 3
POWER
FUSE
OUTPUT
INPUT
DMX512
DMX+,DMX-,COMMON
POWER
FUSE
OUTPUT
INPUT
POWER CORD POWER CORD POWER CORD
6. Power Cord - This cord is used feed main power to the fi xture.
Be sure the main power matches that of the required power of
your fi xture.
7. Fuse Holder - This houses the safety fuse. Replace with exact
type.
DMX Operation:
This unit must be controlled with a DMX controller. This unit is not
sound active and does not include any built in programs. For best
result we recommend the American DJ Show Designer or the American
DJ DMX Operator to control the X-Calibur™.
1. Operating through a DMX controller gives the user freedom to
create his/her own programs tailored to their own individual needs.
This function also allows you to use your fixtures as spots.
2. This operation will allow you to control each individual fixtures
traits with a standard DMX 512 controller such as the American DJ
Show Designer
™
or the American DJ
® DMX Operator.
™
3. The X-Calibur™ uses four DMX channels to operate; Channel 1
is Pan, channel 2 is Tilt, channel 3 is Color, and channel 4 controls
the Gobos.
4. To run your fixture in DMX mode, plug in the fixture via the
XLR connections to any standard DMX controller. Follow the
set-up specifications that come with the controller.
5. Use your controller to control the various fixture traits. A
complete break down of the DMX traits can be found on page
12 of this manual.
©American DJ Supply® - www.americandj.com - X-Calibur™ Instruction Manual Page 9 ©American DJ Supply® - www.americandj.com - X-Calibur™ Instruction Manual Page 10
Due to fog residue, smoke, and dust, cleaning the internal
and external optical lenses must be carried out periodically to
optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Use a brush to wipe down the fan grill.
3. Clean the external optics with glass cleaner and a soft cloth
every 20 days. Situation may very. If used heavily in clubs
with lots of fog, cleaning may be required more often.
4. Clean the internal optics with glass cleaner and a soft cloth
every 30-60 days.
5. Always be sure to dry all parts completely before plugging
the unit in.
Cleaning frequency depends on the environment in which the
fixture operates (i.e. smoke, fog residue, dust, dew).
1. To focus a X-CALIBUR,
™
disconnect main power and flip the
option dip switch one to the on position. Then reconnect main
power.
2. After the unit resets the lamp will strike. The mirror will center
and a preselected gobo will projected.
3. Loosen the thumb screw on the front of the unit that hold the
lens in place.
4. Adjust the focus by manually moving the lens up and down.
5. Tighten the thumb screw after you achieve your desired
focus.
6. Disconnect main power and return the number one option dip
switch to the off position.
7. Reconnect main power.
X-Calibur™ Fuse & Lamp Replacement
X-Calibur™ Operation
To next DMX unit or terminate.
Typical DMX Linking:
X-Calibur™ Operation
X-Calibur™ Cleaning
(48 Seiten)
(33 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern