American Audio COMMANDER PLUS - REV 4-5 Bedienungsanleitung PDF herunterladen (Seite 7)

OPERATION

Overview

Use HEX front panel buttons to toggle each loop on or off. The buttons glow red

when the effect is engaged, otherwise it is in bypass.

You need a MIDI controller to recall preset combinations of effects. The following

sections explain how to control HEX with various controllers.

Use with Ground Control Pro

When connected to a Voodoo Lab Ground Control Pro, HEX functions exactly

like a GCX Guitar Audio Switcher.

GCX/HEX units are numbered in the order they appear in the MIDI chain. The

first unit connected to Ground Control Pro’s MIDI out will be GCX #1. A GCX or

HEX connected to the MIDI out of GCX #1 will be GCX #2, and so on.

Note: MIDI PC and CC must be disabled in HEX for this to work properly. Refer

to Setup: Enable MIDI Messages on page 7.

Setup Ground Control Pro like this:

1) Press both SETUP buttons to enter setup mode.

2) Press EXPANDERS.

3) Press YES/+ to turn on GCX-1. To enable another GCX, press BANK  then

YES/+ to turn on GCX-2. You can enable up to four GCX/HEX modules.

4) Press either SETUP button to see “EXIT Y/N” then press YES/+ to exit setup

mode.

Refer to the Ground Control Pro user’s manual for a detailed description of how

to create presets and assign instant access buttons to individual loops.

Use with Commander

When connected to a Voodoo Lab Commander, HEX functions exactly like a

Pedal Switcher. With Commander, you can save and recall preset combinations

of HEX loop settings.

Refer to Commander Owner’s Manual for detailed information and instructions.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

American Audio COMMANDER PLUS - REV 4-5 Bedienungsanleitung Seite 7