29
IR Products
Xantech Corporation | 1969 Kellogg Avenue, Carlsbad, CA 92008 | 800.843.5465 | FAX 800.492.6832 | www.xantech.com
CONNECTING BLOCKS
ONE ZONE TEN SOURCE AMPLIFIED CONNECTING BLOCK
• Emitter port jumpers permit high or low power IR output
• High-speed opto-isolator for improved operation
• Parallel emitter ports drive 10 single or 10 dual emitters
• Contains red LED input signal Test-IR
• Requires either the 781ERGPS or 782ERGPS Power Supply
• Dimensions: 6” x 2 1/4” x 15/16” (153mm x 58mm x 24mm)
• Up to nine 790-00’s can be connected to the 791-44 for control of up to 100 devices in a single zone
• STATUS terminal for connection of Xantech IR Receivers and Keypads that have status indicator LED’s
• Quick connect stereo mini jack for Xantech IR Receivers that use a stereo mini plug
Order: 79144
MULTIPLE EMITTER CONNECTING BLOCK
• Emitter expansion block for the 791-44 or 792-10
• Parallel emitter ports drive 10 single or 10 dual emitters
• Contains a series 100-Ohm resistor per emitter port
• Emitter and IN/OUT ports are 3.5 mm mono mini-jacks
• Screw terminals provide for wired input connections
• Requires the 792-10 Power Module or the 791-44 Ampli ed Connecting Block to drive the 790 block
• Dimensions: 6” x 2 1/4” x 15/16” (153mm x 58mm x 24mm)
Order: 79000
FOUR ZONE TEN SOURCE AMPLIFIED CONNECTING BLOCK
• Controls four individual zone’s equipment
• Can control two pieces of equipment per zone
• Controls 10 pieces of equipment used for common sources
• Expandable to nine zones with the model 796-20 Zone Expander
• 14 test LED’s indicate proper operation and hook-up
• Isolated input for each zone
• Dimensions: 1” x 13 1/8” x 1 7/8”
(26mm x 340mm x 48mm)
• Requires 782ERGPS Power Supply
Order: 79520
SIX ZONE CONNECTING BLOCK/EXPANDER
• Expands the 795 Zone Controller to a total of nine zones
• Connects directly to the 795 and is powered via the 795
• Can be used in conjunction with a 791-44
(without a 795) for a 6 zone system
• Multiple 796’s may be used with a 791-44 for even more zones (limited only by IR noise considerations)
• Dimensions: 1” x 13 1/8” x 1 7/8” (26mm x 340mm x 48mm)
Order: 79620
Kommentare zu diesen Handbüchern