22 Smart-UPS On-Line, 230 V, 1 kVA to 20 kVA Technical Specifications 990-4769
AC Output
Configurable for 220, 230, or 240 V
Configurable for
220, 230, 240,
380, 400, 415 V
Output
Frequency
(sync to mains)
50/60 Hz +/- 3 Hz user-adjustable +/- 0.1
Output Voltage
Distortion
For online operation: At overload of 105% - infinite;
at overload of 125% - 1 minute;
at overload of 150% - 30 seconds.
(8) IEC 320 C13; (2) IEC 320 C19
(1) Hard Wire 3-
wire (H N + G);
(4) IEC 320 C13;
(4) IEC 320 C19
(1) Hard Wire 3-
wire (H N + G);
(1) Hard Wire 5-
wire (3PH + N + G);
(8) IEC 320 C19
1
When the UPS is in bypass mode, overload is limited by the external input circuit breaker that feeds the UPS.
2
Wire connection “G” represents protective earth ground.
Configuration and Management
Network Management Card 2
Smart-UPS On-Line models, 5kVA and higher, have the Network Management Card 2 with Environmental
Monitoring pre-installed. This management card enables you to monitor and control an individual UPS remotely
over your network.
See the User’s Guide, UPS Network Management Card 2, AP9630, AP9631 for information on how to use this
management card. To obtain the latest version of this documentation:
1. Go to www.apc.com/site/products/index.cfm.
2. Click on Uninterruptible Power Supply (UPS)
3. Under UPS Management, click on UPS Network Management Cards.
4. Click on UPS Network Management Card 2 with Environmental Monitoring.
5. Click on the Documentation tab.
6. Download the UPS Network Management Card 2 - User’s Guide for the latest firmware release.
Kommentare zu diesen Handbüchern